RINSE+ V2 Foam Cannon, 2L hand-pumped foam sprayerHARDWARE ONLY · 2L

2L HAND-PUMPED FOAM CANNON

Even foam.
No fixed setup.

A thick, even fan of foam without a pressure washer, compressor or hose attachment. Fill it, pump it, spray it, on your driveway.

4.6 from 22 reviews

2L Marked barrel
By hand Pump until firm
2 Nozzles
1 Bucket or hose

V2 Foam Cannon

One assembled 2L cannon. In the box: two nozzles — one brass, one chrome — plus two red filters and one rubber grommet. Liquids sold separately.

$40

30-day money back
Shipping from $5.95
Ships in 2 business days from Indianapolis

This is the hardware. It creates the pressure and the spray pattern. Add Pre-Wash or Snow Foam, or take the Starter Kit if you need the complete system.

WHY THIS CANNON

Pressure in your hand.
Not on the wall.

01
Thick, even fan coverage

The adjustable nozzle spreads product across the panel instead of firing one narrow stream.

02
Smooth manual pump action

Metal working components and a solid pump assembly, built for consistent pressure and repeat use.

03
Measure inside the tool

A built-in measuring cup doses the concentrate. External 1L, 1.5L and 2L marks make the water fill obvious.

HOW TO USE IT

Fill. Pump.
Spray.

01 Fill with water to the correct mark.1L CAR · 1.5L TRUCK
02 Add correctly diluted RINSE+ liquid.WATER FIRST
03 Secure the head and pump until it feels firm and hard to push.PUMP UNTIL FIRM
04 Adjust the nozzle to an even fan and spray.
05 Release the pressure through the safety valve before opening.EVERY TIME

The fan softens as pressure falls. Stop, add five or six strokes and carry on — that is normal pump operation, not a fault.

TWO NOZZLES WITH EVERY CANNON

One fitted.
One spare.

Brass Fitted to the cannon when it arrives. Twist it to tune the fan to the product and the pressure.
Chrome The spare, in the bag with the filters and the grommet. It sprays the same as the brass.

Both ship with every cannon, along with two red filters and one rubber grommet. They spray the same, so fit whichever you prefer and keep the other as the spare.

TWO MINUTES AFTER EACH WASH

Keep the cannon.
Clear the product.

01 Rinse the barrel with clean water.EVERY WASH
02 Pump clean water through until it sprays clear.
03 Store it depressurized with the head loosened.PROTECT THE SEALS
04 Keep it indoors, away from frost and direct heat.41–86°F

Never open it under pressure. Release the pressure through the safety valve first. Do not modify the valve, tank, hose or fittings.

CHOOSE THE RIGHT STARTING POINT

Spare cannon.
Or complete system.

This page is one cannon on its own. Best for an owner adding a second or replacing one.

GOOD TO KNOW
The short answers.

No. This is one V2 Foam Cannon with both of its nozzles. Choose the Starter Kit if you also need Pre-Wash and Snow Foam.

Not to spray. The cannon builds its own pressure by hand. You still need water to rinse the vehicle — a hose is easiest, but a bucket or jerry can works.

Because it is a manual air-pressure tool. Add five or six strokes when the fan starts to soften and carry on.

The assembled 2L cannon, two nozzles — one brass, one chrome — two red filters and one rubber grommet. Liquids are sold separately; choose the Starter Kit if you also need Pre-Wash and Snow Foam.

Either. They spray the same. One is fitted when the cannon arrives and the other is the spare — the Starter Kit therefore ships with a black and a gold brass nozzle per cannon.

2 liters, with external marks at 1L, 1.5L and 2L. Fill to 1L for a car and 1.5L for a full-size truck.

Build the pressure.
Skip the setup.

V2 Foam Cannon · 2L · hardware only

Add V2 Foam Cannon — $40

30-day money back · ships in 2 business days from Indianapolis